Xerox 2006NPC - DocuColor Color Laser User Manual page 444

23. Tools Mode
3. Press the Select button. Password Input is displayed on the Copier
Screen.
4. Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering a password, press the Clear (C) button.
5. Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6. Use the Arrow Buttons to highlight the User Password option.
7. Press the Select button. User Password selection is displayed on the
Copier Screen.
8. Use the Arrow Buttons to turn the user password option On or Off.
Highlight the On option if you are assigning a new user password. Highlight
the Off option if you are changing a user password. To change a user
password, you must first turn the old password off and then assign a new
password.
9. Press the Select button. The copier/printer prompts you to enter a 4-digit
number.
10. Using the Numeric Keypad enter a four-digit password.
If you make a mistake while entering the password, press the Clear (C)
button.
11. Press the Select button. When the change is confirmed the
Administrator Menu is displayed on the Copier Screen.
12. Press the Exit button. The Tools Main Menu is displayed on the Copier
Screen.
13. Press the Tools button to exit Tools Mode.
23–18
Xerox DocuColor 2006