Using The 2 Up Option - Xerox 2006NPC - DocuColor Color Laser User Manual

Using the 2 Up option

Use the following procedure to make a copy using the 2 Up feature:
1. If the DocuColor 2006 is in printer mode, press the Copy button to enter
copy mode.
2. Press the Clear All button to restore default settings.
3. Position the originals in the Document Feeder with the long edge of the
paper entering the Document Feeder first (Long Edge Feed).
You must use the Document Feeder to create a 2 Up copy. For more
information on positioning originals in the Document Feeder, go to the Basic
Copying chapter.
4. Select the Paper Supply and the % R/E required. Several common sizes
are listed below. Use the Zoom feature to determine the best reduction
for other sizes.
8.5 x 11 in. Portrait
8.5 x 11 in. Portrait
8.5 x 11 in. Portrait
5. Load paper into the paper tray by placing the short edge of the paper to
feed into the machine first (Short Edge Feed).
6. Press the Advanced Features button to display the Advanced Features
selections on the Copier Screen.
7. Use the arrow buttons to highlight the 2 Up option.
8. Press the Select button to display the 2 Up selection on the Copier
Screen.
Xerox DocuColor 2006
Original
A4 Portrait
A4 Portrait
A4 Portrait
Desired 2-Up output
8.5 x 11 in. Landscape
11 x 17 in. Landscape
11 x 14 in. Landscape
A4 Landscape
B4 Landscape
A3 Landscape
22. Copy Features
Reduction
64%
100%
75%
70%
86%
100%
22–25