Xerox 2006NPC - DocuColor Color Laser User Manual page 552

B. Print options
Black Overprint
Printer default/Off/On
Brightness
Printer default/85% Lightest/
90% Lighter/95% Light/
100% Normal/105% Dark/
110% Darker/115% Darkest
CMYK Simulation Method
Quick/Full
B–4
Select Off to print black text
with knockouts.
Select On to overprint black
text.
Select 85% for a substantially
lighter image, 115% for a
substantially darker image, or
use one of the settings in
between.
Select Quick to utilize
one-dimensional transfer
curves to adjust density output
of individual color channels.
Select Full to utilize four-
dimensional transfer curves,
which adjust for hue as well as
density of individual color
channels.
The Printer default setting
reflects the setting specified
in Printer Setup.
For Windows, select Expert
Color as the Color Mode to
access this option.
If this option is set to On, the
Combine Separations option
must be set to Off.
Setting this option to On
automatically sets the Pure
Black Text/Graphics option to
On.
More information follows this
table.
This option is not available for
PCL printing.
Setting this option to Printer
default produces the same
result as the 100% Normal
setting.
This option is not available for
PCL printing.
For Windows, select Expert
Color as the Color Mode to
access this option.
For more information, refer to
Using ColorWise Pro Tools.
This option is not available for
PCL printing.
Xerox DocuColor 2006