Checking The Program Setting And Setting Attribute; Editing The Current Data - Brother BAS-311E Instruction Manual

Chpater 2 Programming with Help Function
Refer to "Checking the program setting and setting attribute" (page 107).
The following options are available as editing functions.
Adjust the needle position before editing.
1.
98

Checking the program setting and setting attribute

Editing the current data

Moving data of the needle positions after the current position in parallel by feeding
Moving data of the needle positions after the current position in parallel by sewing
with the specified pitch
Moving data of the needle positions after the current position in parallel
Copying repeatedly the previous data on the current and the following needle positions
Copying the previous data symmetrically to the Y axis on the current and the
following needle positions
Copying the previous data symmetrically to the X axis on the current and the
folowing needle positions
Copying the previous data symmetrically to a point on the current and the following
needle positions
Copying the previous data in the reverse direction on the current and the following
needle positions
Changing the stitch length or the number or lines for a multiple stitch
Refer to "Checking the program setting and setting attribute" (page 107) for adjustment.
Select and press .
Programmer