Detaching And Refitting The Toner Motor 1, 2, 3 And 4 - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N

(4) Detaching and refitting the toner motor 1, 2, 3 and 4

Procedure
1. Remove the right cover (see page 1-6-3).
2. Remove the one connector.
3. Remove the hole which is inserted into the
projection of main unit frame side, slide
toner motor 4 to up in order to remove the
hook.
4. Remove the toner motor 4.
5. Check or replace the toner motor 4 and then
refit all the removed parts. (Also four toner
motors with the same procedure, there is no
order.)
1-6-34
Hooks
Hooks
Holes
(Yellow)
Projections
Figure 1-6-46
Toner motor
(Black)
Connector
Bihind view
(Cyan)
(Magenta)