Detaching And Refitting The Bias High Voltage Pwb - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N

(5) Detaching and refitting the bias high voltage PWB

Procedure
1. Remove the right cover (see page 1-6-3).
2. Unlatch the five latches and remove the two
connectors and then remove the bias high
voltage PWB.
3. Check or replace the bias high voltage PWB
and then refit all the removed parts.
1-6-30
Latch
Connector
Bias high volatage PWB
Latches
Latch
Connector
Figure 1-6-41