Detaching And Refitting The Fuser Thermistor 1 And 2, Fuser Thermostat 1 And 2, Fuser Heater Lamp 1 And 2, Heat Roller, And Press Roller - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N
(2) Detaching and refitting the fuser thermistor 1 and 2, fuser thermostat 1 and 2, fuser heater lamp 1 and 2, heat
roller, and press roller
Procedure
1. Remove the fuser unit (see previous page).
2. While two latch unlatching, remove the fuser
bottom cover by making slide.
3. Remove the one tab.
4. Remove the two screws form the terminal.
1-6-18
Latch
Fuser bottom cover
Tab
Latch
Figure 1-6-22
Terminals
Screws
Figure 1-6-23