Detaching And Refitting The Fuser Drive Unit - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

(3) Detaching and refitting the fuser drive unit

Procedure
1. Remove the right cover (see page 1-6-3).
2. Remove the one connector.
3. Remove the two screws and the remove the
fuser drive unit.
4. Check or replace the fuser drive unit and
then refit all the removed parts.
Fuser drive unit
Screw
Figure 1-6-45
FS-C5016N
Screw
Connector
1-6-33