Defective Harness - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N
Code
1200 Side registration motor error
• The duplexer PWB of the optional
duplexer cannot detect the home posi-
tion of the adjust guide.
2610 Paper feed motor error (top)
• The notification that was received, the
motor clock sensor cannot detect the
revolution of the paper feed motor of
the optional paper feeder (top).
2620 Paper feed motor error (middle)
• The notification that was received, the
motor clock sensor cannot detect the
revolution of the paper feed motor of
the optional paper feeder (middle).
2630 Paper feed motor error (bottom)
• The notification that was received, the
motor clock sensor cannot detect the
revolution of the paper feed motor of
the optional paper feeder (third).
5301 Eraser lamp 4 error (black drum unit)
• The eraser lamp 4 [PWB] (KP-976) of
the black drum unit does not communi-
cate with the engine controller PWB
(KP-1054) normally.
1-5-6
Contents
Causes Check procedures/corrective measures
Defective duplexer Refer to the duplexer DU-300's service man-
DU-300. ual.
Defective engine Replace the engine controller PWB (KP-
controller PWB 1054). See page 1-6-25.
(KP-1054).
Defective paper Refer to the paper feeder PF-60's service
feeder PF-60. manual.
Defective engine Replace the engine controller PWB (KP-
controller PWB 1054). See page 1-6-25.
(KP-1054).
Defective paper Refer to the paper feeder PF-60's service
feeder PF-60. manual.
Defective engine Replace the engine controller PWB (KP-
controller PWB 1054). See page 1-6-25.
(KP-1054).
Defective paper Refer to the paper feeder PF-60's service
feeder PF-60. manual.
Defective engine Replace the engine controller PWB (KP-
controller PWB 1054). See page 1-6-25.
(KP-1054).
Defective eraser Replace the eraser lamp 4 [PWB] (KP-976).
lamp 4 [PWB] (KP-
976).
Defective engine Replace the engine controller PWB (KP-
controller PWB 1054). See page 1-6-25.
(KP-1054).
Defective drum Replace the black drum unit. See page 1-6-
PWB 4 (KP-972). 12.

Defective harness

Check the connection of the YC401 connec-
between drum tor of the drum PWB (KP-972), if there is
PWB (KP-972) and trouble, remedy or replace.
eraser lamp 4
[PWB] (KP-976), or
poor contact of the
connector termi-
nals.
Check the continuity of the harness
Defective harness
(S02869) between (S02869), check the connection YC3 con-
engine controller nector of the engine controller PWB (KP-
PWB (KP-1054) 1054), if there is trouble, remedy or replace.
and LED print
heads relay PWB
(KP-1048), or poor
contact of the con-
nector terminals.
Defective LED print Replace the LED print heads relay PWB
heads relay PWB (KP-1048). See page 1-6-28.
(KP-1048).
Remarks