Installing Hard Disk Unit (Optional) - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N
1-3-5 Installing the hard disk unit (optional)
<Procedure>
1. Turn off printer power.
2. Remove the two screws and remove the
optional interface slot cover.
3. Insert the hard disk unit into the optional
interface slot.
4. Use the two screws to secure the hard disk
unit.
5. Format the hard disk unit. (Refer to the oper-
ation guide.)
1-3-10
Optional interface slot
Cover
Screws
Figure 1-3-17
Screws
Hard disk unit HD-4