Downloading Firmware Using The Memory Card - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

(3) Downloading firmware using the memory card

The procedure below provides how to download firmware from a memory card. Note that you can download both the sys-
tem and engine firmware at a time.
1. Turn printer power on.
2. Insert the memory card into the printer's
memory card slot.
3. Press MENU key on the printer's operation
panel and carry out the memory card for-
matting procedure 1.
4. When formatting is complete, turn printer
power off.
5. Remove the formatted memory card from
the memory card slot.
Memory card slot
Memory card
Memory card slot
Figure 1-7-4
Message display
Ready
Press the MENU key.
Memory Card >
Press the
>Format
1
Press the ENTER key.
>Format ?
Press the ENTER key.
Processing
(Format information is
automatically printed.)
Ready
Figure 1-7-5
Figure 1-7-6
Figure 1-7-7
FS-C5016N
Operation panel keys
Press the or key.
key. Press the or key.
Memory card slot
Memory card
1-7-3