Step3 Installing The Toner Container - Kyocera Mita FS-1000+ Installation Manual

Ifs10ep-jp.book Page 3 Friday, December 22, 2000 4:27 PM
STEP
Installing the Toner Container
3
Before you can use the printer for the first time, you must set up the printer by installing
the toner container and interfacing with the computer.
1
Open the printer top cover all the way.
2
Confirm that the lock lever is in the
release (UNLOCK) position. If not, pull it
forward until it is in the release posi-
tion.
3
Take the toner container from the bag.
Hold it with the protective seal (orange-
colored) facing up. Shake the toner con-
tainer horizontally at least 5 times. This
ensures that the toner is evenly distrib-
uted inside.
3
Go to next page