Detaching And Refitting The Engine Controller Pwb And Power Supply Pwb - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

(2) Detaching and refitting the engine controller PWB and power supply PWB

Procedure
1. Remove the main controller PWB (see pre-
vious page).
2. Remove the right cover, left cover and, rear
cover. (see pages 1-6-2, 3, 4).
3. Remove the all (machine left: five, machine
right: four) connectors.
4. Remove three screws.
5. Loose the one screw.
6. Remove the main unit frontal projections
and remove the controller box.
Connectors
Machine left
Figure 1-6-33
Screw
Main frame
Screw
Controller box
Figure 1-6-34
FS-C5016N
Connectors
Machine right
Connectors
Screw
Screw
1-6-25