Secondary Transfer And Separation Section - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

2-1-5 Secondary transfer and separation section

The secondary transfer and separation section includes the secondary transfer roller which is installed on the paper feed
unit. The secondary transfer roller is applied by the bias high voltage PWB of DC bias. The image constituted by toner on
the primary transfer belt is transferred on paper by means of the difference in potential. The paper is separated from the
transfer belt as the curvature radius of the secondary transfer roller is considerably small.
Feed base
(Paper feed unit)
Secondary transfer roller
Figure 2-1-31
To
fuser unit
Feed base
(Paper feed unit)
Figure 2-1-32 Secondary transfer unit
Paper chute
Secondary
Transfer roller gear
transfer roller
FS-C5016N
2-1-23