Kyocera Mita FS-C5016N - Color LED Printer Service Manual page 92

FS-C5016N
10. Remove the one screw and then remove the
fuser right cover.
11. Remove the fuser heater lamp 1 and 2.
12. Remove the two pressure springs.
13. Remove the fuser upper cover, right pres-
sure lever and, left pressure lever.
14. Remove the fuser stay.
1-6-20
Fuser heater lamp 2
(Press roller: 350 W)
Fuser stay
Pressure
Spring
Left pressure lever
Fuser heater lamp 1
(Heat roller: 500 W)
Screw
Fuser right cover
Figure 1-6-26
Right pressure lever
Pressure
Spring
Upper fuser cover
Figure 1-6-27