Developing Section; Detaching And Refitting The Developer Unit - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

1-6-5 Developing section

(1) Detaching and refitting the developer unit

Procedure
1. Open the top cover.
2. Remove the one connector.
3. While releasing two release levers and then
remove the developer unit. (Use the same
procedure for other developers.)
Release lever
Release lever
Developer unit
(Cyan)
(Black)
(Magenta)
Figure 1-6-14
FS-C5016N
Connector
(Yellow)
1-6-11