Kyocera Mita FS-C5016N - Color LED Printer Service Manual page 112

FS-C5016N
6. Insert the memory card to the PC's slot or to
the adaptor.
7. Copy the firmware file to download to the
root directory of the memory card.
8. Remove the memory card from the PC's slot
or the adaptor.
9. Confirm that the printer's power switch is set
to off.
10. Insert the memory card into the printer's
memory card slot.
11. Turn printer power on. The firmware file in
the memory card will be automatically down-
loaded.
12. Message display 1 is displayed during
downloading. When message display 2 is
displayed to indicate downloading is fin-
ished.
13. Turn printer power off.
14. Remove the memory card from memory
card slot.
15. Turn printer power on.
16. Confirm that message display 3 is dis-
played after warm-up.
17. Print the status page. (See page 1-4-2.)
18. Print the status page to check that the firm-
ware version has been updated.
1-7-4
Memory card
Memory card
Memory card slot
Message display
1 Downloading
Version 88.00
[System]
2 8800
02/06/07[1234] 2
Release date Checksum Plural data
Power switch: Off
Power switch: On
3
Ready
Figure 1-7-10
Adapter
(Memory card reader/writer)
Figure 1-7-8
Memory card slot
Figure 1-7-9
*: When a some key is pushed, indication changes.
Product code: 80=FS-C5016N
Version A005
[Engine]
80 A005
*
03/03/07[1234] 2
Release date Checksum
Memory card slot
Memory card
To PC
Plural data