Drum Unit; Installation Environment - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

1-2-1 Drum unit

Note the following when handling or storing the drum unit.
• When removing the drum unit, never expose the drum surface to strong direct light.
• Avoid abrupt changes in temperature and humidity.
• Avoid exposure to any substance which is harmful to or may affect the quality of the drum.
• Do not touch the drum surface with any object. Should it be touched by hands or stained with oil, clean it.
Developer unit and toner container
Store the toner container in a cool, dark place.
Avoid direct light and high humidity.

1-2-2 Installation environment

1. Temperature: 10 - 32.5 °C/50 - 90.5 °F
2. Humidity: 20 - 80%RH
3. Power supply: 120 V AC (U.S.A./Canada), 220 - 240 V AC (European countries)
4. Power source frequency: 50 Hz ±2%/60 Hz ±2%
5. installation location
Avoid direct sunlight or bright lighting. Ensure that the photo-conductor will not be exposed to direct sunlight or other
strong light when removing paper jams.
Avoid extremes of temperature and humidity, abrupt ambient temperature changes, and hot or cold air directed onto
the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowance inclination: 1°).
• Avoid air-borne substances that may adversely affect the machine or degrade the photo-conductor, such as mer-
cury, acidic of alkaline vapors, inorganic gasses, NOx, SOx gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 600 mm/26.6"
Machine rear: 250 mm/9.84"
Machine right: 250 mm/9.84"
Machine left: 400 mm/15.7"
Machine top: 750 mm/29.5"
a
b
a: 385mm/15.16"
b: 345mm13.58"
c: 470mm18.5"
Figure 1-2-1 Installation dimensions
c
FS-C5016N
1-2-1