Pwbs; Detaching And Refitting The Main Controller Pwb - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

FS-C5016N

1-6-9 PWBs

(1) Detaching and refitting the main controller PWB

Procedure
1. Turn off the power switch and then remove
the power cord.
2. When the optional memory card has been
installed in the Memory card slot already,
remove that.
3. Remove the two screws and then remove
the main controller PWB.
1-6-24
Memory card slot
Main controller PWB
Screw
Figure 1-6-32
Screw