Kyocera Mita FS-C5016N - Color LED Printer Service Manual page 72

FS-C5016N
(15) Fusing is loose.
Causes
1. Wrong types of paper.
2. Defective pressure for the heat roller and
press roller.
3. Flawed heat roller or press roller.
(16) )Colors are printed offset to each
other.
Causes
1. The drum unit is not properly seated in its
position.
1-5-28
Causes
1. Wrong types of paper.
2. Defective pressure for the heat roller and press roller.
3. Flawed heat roller or press roller.
Check procedures/corrective measures
Check if the paper meets specifications, replace paper.
Check the fuser pressure springs.
Replace the heat roller or press roller. See page 1-6-18.
Causes
1. The drum unit is not properly seated in its position.
Check procedures/corrective measures
Perform the color registration to correct (Refer to user's manual).