Kyocera Mita FS-C5016N - Color LED Printer Service Manual page 26

FS-C5016N
Connecting the cable.
1. Connect the USB, ethernet, or parallel cable
between the printer and the computer.
2. Connect the power cord to the printer AC
inlet.
3. Connect the power cord to the wall outlet.
Printing a status page for test.
1. Turn on the printer power switch. The mes-
sage will change from [Self test] to [Ready]
when initialization is complete.
• Use the following key operation to print a
status page for test.
• Press the MENU key when [Ready] is dis-
played.
• Press the key to display [Print Status
Page].
• Press the ENTER key to display [Print Sta-
tus Page?].
• Press the ENTER key. Processing] will be
displayed and the status page will be
printed. When printing is complete, [Ready]
will appear again.
2. Check to see if the status page is properly
printed.
Completion of the machine installation.
1-3-6
USB
Parallel
Figure 1-3-11
AC inlet
Ethernet
Power cord