2-1-6 Fuser section
(1) Fuser unit
The fuser unit is composed of the heat roller, press roller, fuser heater lamp 1, fuser heater lamp 2, and the change guide.
Paper sent from the secondary transfer and separation section is applied with heat and pressure to permanently fuse
toner on paper. The change guide switches the destination of paper to the face-down tray or optional face-up tray. It also
sends paper to the duplexer.
@
3
4
#
$
6
Figure 2-1-34
1.
Upper fuser frame
2.
Lower fuser frame
3.
Upper exit roller
4.
Lower exit roller
5.
Heat roller
6.
Press roller
7.
Fuser heater lamp 1
1
5
!
7
8
9
8.
Fuser heater lamp 2
9.
Lower fuser cover
10. Lower entrance guide
11. Stay plate
12. Change guide
13. Exit guide
14. Fuser frame
FS-C5016N
0
2-1-25