Fuser Unit; Detaching And Refitting The Fuser Unit - Kyocera Mita FS-C5016N - Color LED Printer Service Manual

1-6-8 Fuser unit

(1) Detaching and refitting the fuser unit

Procedure
1. Remove the rear cover (see page 1-6-2).
2. Remove the right cover and left cover (see
pages 1-6-4, 5).
3. Remove the two screws and then remove
the fuser unit.
4. Check or replace the fuser unit and then refit
all the removed parts.
Screw
Screw
Figure 1-6-21
FS-C5016N
Fuser unit
1-6-17