Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware Installation Manual page 54

Installing Memory in a WAE-674
Figure 4-6
Remove the DIMM air baffle.
Step 5
Locate DIMM slots 7 and 10, as shown in
Step 6
The standard memory for your WAE-674 is located in DIMM slots 1 and 4. You
will install the two upgrade DIMMS in slots 7 and 10.
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
4-10
Chapter 4 Installing Hardware Options for the WAE-7371, WAE-7341, and WAE-674
Accessing the DIMMs
Riser card
assembly
DIMM air baffle
Finger hole
Release ring
Figure 4-7.
OL-15012-02