Safety Guidelines
Warning
Warning
Safety Guidelines
General Precautions
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
2-4
Installation of the equipment must comply with local and national electrical
codes. Statement 1074
To prevent bodily injury when mounting or servicing this unit in a rack, you
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the
equipment, observe the precautions in this section.
Observe the following general precautions for using and working with the WAE:
Observe and follow service markings. Do not service any Cisco product
•
except as explained in your system documentation. Opening or removing
covers that are marked with the triangular symbol with a lightning bolt may
expose you to electrical shock. Components inside these compartments
should be serviced only by a trained and qualified service technician.
Chapter 2
Preparing to Install the Wide Area Application Engine
Statement 1006
OL-15012-02