Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware Installation Manual page 146

Appendix C Using the Configuration/Setup Utility Program
Configuration/Setup Utility Menu Options
Start Options
Choose this option to view or change the start options. Startup sequences take
effect when you start the device. The startup sequence specifies the order in which
the device checks devices to find a boot record. The device starts from the first
boot record that it finds.
This option is on the full Configuration/Setup Utility menu only.
Advanced Setup
Choose this option to change settings for advanced hardware features.
The device might malfunction if these options are incorrectly configured. Follow
Caution
the instructions in the window carefully.
This option is on the full Configuration/Setup Utility menu only.
Event/Error Logs
Choose this option to view the three most recent error codes and messages that the
system generated during POST. You can use the arrow keys to move between
pages in the error log. Choose Clear POST Error Log to clear the POST error
log.
Save Settings
Choose this option to save the changes you have made in the settings.
Restore Settings
Choose this option to cancel the changes you have made in the settings and restore
the previous settings.
Load Default Settings
Choose this option to cancel the changes you have made in the settings and restore
the factory settings.
Exit Setup
Choose this option to exit from the Configuration/Setup Utility program. If you
have not saved the changes you have made in the settings, you are asked whether
you want to save the changes or exit without saving them.
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
C-4
OL-15012-02