Completing The Installation - Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware Installation Manual

Completing the Installation

Completing the Installation

Step 1
Step 2
Caution
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
4-8
Chapter 4
To complete your installation, follow these steps:
Install the top cover by placing the cover-release latch in the open (up) position.
Insert the bottom tabs of the top cover into the matching slots in the WAE chassis.
Press down on the cover-release latch to lock the cover in place, as shown in
Figure 4-5.
Figure 4-5 Installing the Cover
Cover-release latch
Install the device in a rack.
For complete rack installation and removal instructions, see
the Wide Area Application Engine."
Install the device only in a rack cabinet with perforated doors.
Installing Hardware Options for the WAE-7371, WAE-7341, and WAE-674
Chapter 3, "Installing
OL-15012-02