Cisco WAE-674-K9 - Wide Area Application Engine 674 Hardware Installation Manual page 126

Symptoms and Solutions
Table 6-20 POST Error Codes (continued)
Error Code Symptom
1805 PCI option ROM checksum error.
1810 PCI error.
1962 Drive does not contain a valid boot
sector.
00012000 Processor machine check error.
00019701 Microprocessor 1 failed.
01298001 No update data for microprocessor 1. Check microprocessor 1.
01298101 Bad update data for
microprocessor 1.
Cisco Wide Area Application Engine 7341, 7371, and 674 Hardware Installation Guide
6-52
Chapter 6 Troubleshooting the System Hardware
Cause and Action
Remove the adapter.
1.
Reseat the adapter.
2.
Reseat the riser card.
3.
Check the adapter.
4.
Check the riser.
5.
Check the system board.
6.
Reseat the adapter.
1.
Reseat the riser card.
2.
Check the riser.
3.
Check the system board.
4.
Verify that a startable operating system is
1.
installed.
2. Run the hard disk drive diagnostics.
Check the hard disk drive.
3.
Check the hard disk drive backplane cable.
4.
Check the hard disk drive backplane.
5.
Check the system board.
6.
1. Check the microprocessor.
Check the system board.
2.
Check microprocessor 1.
1.
Check the system board.
2.
Check microprocessor 1.
OL-15012-02