Viewing License Information In Device Manager; Removing Licenses - Cisco DS-C9216I-K9 Configuration Manual

Chapter 5 Obtaining and Installing Licenses
Once an expiration period has started, notifications about license expiration appear in the Fabric
Caution
Manager's Events pane on a daily basis. During the last seven days of the expiration period, these
messages are displayed hourly. After the final seven days of the expiration period, the feature is turned
off and your network traffic may be disrupted.

Viewing License Information in Device Manager

To view license information in Device Manager, perform these steps:
Choose Admin > License Manager. You see the License Manager dialog.
Step 1
Click the Features tab to see the name of the feature package, the type of license installed, the number
Step 2
of licenses used (Usage Count), the expiration date, the grace period (if you do not have a license for a
particular feature), and any errors (for example, if you have a missing license).
Click the Files tab to display the information about each of the License Key Files installed on your
Step 3
switch.

Removing Licenses

You can only uninstall a permanent license that is not in use. If you try to delete a permanent license that
is currently being used, the software rejects the request and issues an error message. Features turned on
by a permanent license must be disabled before the license in uninstalled.
Uninstalling an unused license causes the grace period to come into effect. The grace period is counted
from the first use of the feature without a license and is reset when a valid license file is installed.
If you are using an evaluation license and would like to install a new permanent license, you can do so
Tip
without service disruption and before the evaluation license expires. Removing an evaluation license
immediately triggers a grace period without service disruption.
Uninstalling a license requires the related features to first be disabled.
Caution
To remove a license, perform the following procedure:
Step 1 Log in to the switch. If you are using Fabric Manager to remove licenses from multiple switches, you do
not need to log in to each switch; however, the switches must be in the fabric you are viewing.
From Fabric Manager, select Switches > License Manager from the Physical pane. The license
Step 2
information is listed in the Information pane, one line per feature.
From Device Manager, select Admin > License Manager. You see the License Manager dialog.
OL-7753-01

Viewing License Information in Device Manager

Cisco MDS 9000 Fabric Manager Switch Configuration Guide
5-9