Chapter 14
Configuring PortChannels
•
If you change the links after the PortChannel is configured, be sure to reconnect the links to interfaces
within the PortChannel and re-enable the links, and verify that the PortChannel is functioning as
required.
If all three conditions are not met, the faulty link is disabled.
Default Settings
Table 14-1
Table 14-1
Parameters
PortChannels
Create PortChannel
Default mode
Quiesce
OL-7753-01
Links in a PortChannel must not be changed after the PortChannel is configured.
lists the default settings for PortChannels.
Default PortChannel Parameters
Default
FSPF is enabled by default.
Administratively up.
Auto.
Disabled.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Default Settings
14-7