Configuring Event Security; Configuring Event Filters; About Rmon Facilities; Enabling Rmon Alarms By Port - Cisco DS-C9216I-K9 Configuration Manual

Chapter 28 Configuring System Message Logging
Complete the fields and click Apply to create the event destination, or click OK to create the destination
Step 3
and close the dialog box.

Configuring Event Security

This is an advanced function that should only be used by administrators having experience with
Caution
SNMPv3.
To configure event security from the Fabric Manager, choose Events > Notifications/Traps on the menu
tree, and click the Security tab.
To configure event security from the Device Manager, choose Destinations from the Events menu and
click the Security tab.
The Information pane from the Fabric Manager displays event security information for multiple
switches. The dialog box from Device Manager displays event security for a single switch.

Configuring Event Filters

To configure event filters from the Fabric Manager, choose Events > Filters on the menu tree, and click
the FC or Other tab.
To configure event filters from the Device Manager, choose Filters from the Events menu.
The Event Filters dialog box displays event filters for a single switch. The Information pane in Fabric
Manager displays two different views, which list the same event filters for multiple switches, in different
order.
To configure event filters, check the check box next to the appropriate filter name.

About RMON Facilities

Remote Monitoring (RMON) allows you to specify thresholds and monitor alarms on SNMP variables.

Enabling RMON Alarms by Port

To enable alarm notifications by port from the Device Manager, choose Events > Threshold Manager
and click the Ports tab.
To configure an RMON alarm for one or more ports, follow these steps:
Click the Selected radio button.
Step 1
Click the button to the right of the Selected field to display all ports.
Step 2
Choose the ports you want to monitor.
Step 3
Click OK to accept the selection.
Step 4
Alternatively, click the appropriate radio button to select ports by type (All ports, xE ports, or Fx port).
OL-7753-01
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
About RMON Facilities
28-8