Default Ip Storage Settings - Cisco DS-C9216I-K9 Configuration Manual

Default IP Storage Settings

Default IP Storage Settings
Table 24-1
Table 24-1
Parameters
IP MTU frame size
Table 24-2
Table 24-2
Parameters
TCP default port for FCIP
minimum-retransmit-time
keepalive-timeout
max-retransmissions
PMTU discovery
pmtu-enable reset-timeout
SACK
max-bandwidth
min-available-bandwidth
round-trip-time
buffer size
Control TCP and data connection
TCP congestion window monitoring
Burst size
TCP connection mode
special-frame
FCIP timestamp
acceptable-diff range to accept packets
B port keepalive responses
Table 24-3
Table 24-3
Parameters
Number of TCP connections
Fibre Channel targets to iSCSI
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
24-44
lists the default settings for Gigabit Ethernet parameters.
Default Gigabit Ethernet Parameters
lists the default settings for FCIP parameters.
Default FCIP Parameters
lists the default settings for iSCSI parameters.
Default iSCSI Parameters
Chapter 24
Default
1500 bytes for all Ethernet ports
Default
3225
200 milliseconds.
60 seconds.
4 retransmissions.
Enabled.
3600 seconds.
Enabled.
1G.
15 Mbps.
1 ms.
0 KB.
No packets are transmitted.
Enabled
10KB.
active mode is enabled.
Disabled.
Disabled.
+ or - 1000 milliseconds.
Disabled
Default
One per iSCSI session.
Not imported.
Configuring IP Storage
OL-7753-01