Table of Contents
Advertisement
Chapter 29
Discovering SCSI Targets
Click Create to add this target to the table. Click Close to close the Create iSCSI Targets dialog box
Step 8
without adding the target.
Specifying LUN Mappings
To specify LUN mappings, follow these steps:
Be sure you are connected to a switch that contains an IPS module.
Step 1
Open Device Manager.
Step 2
Choose IP > iSCSI. You see the SCSI dialog box.
Step 3
Click the Targets tab if it is not already selected.
Step 4
Click Create. You see the Create iSCSI Targets dialog box. Use this dialog box to map Fibre Channel
Step 5
LUNs to iSCSI LUNs:
Enter the iSCSI LUN name in the Name field.
Step 6
Step 7
Enter the iSCSI LUN, Port WWN, and FC LUN information in the appropriate fields.
Step 8
Click Create to add this LUN to the table. Click Close to close the Create iSCSI LUN Mappings dialog
box without adding the LUN.
Viewing iSCSI Statistics
To view iSCSI statistics, follow these steps:
Be sure you are connected to a switch that contains an IPS module.
Step 1
Open Device Manager.
Step 2
Choose IP > Statistics. You see the Statistics dialog box.
Step 3
Click the iSCSI tab if it is not already selected.
Step 4
Viewing iSCSI Sessions
To view iSCSI sessions, follow these steps:
Be sure you are connected to a switch that contains an IPS module.
Step 1
Open Device Manager.
Step 2
Choose IP > iSCSI. You see the iSCSI dialog box.
Step 3
OL-7753-01
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Specifying LUN Mappings
29-3
Advertisement
Chapters
Table of Contents
Troubleshooting
