Table of Contents
Advertisement
Chapter 28
Configuring System Message Logging
Configuring Syslog Servers
To configure syslog servers, follow these steps:
Step 1
Choose Events > Syslog from the Fabric Manager menu tree, and then click the Servers tab. The
Information pane displays syslog information for multiple switches.
From the Device Manager, choose Events > Syslog, and then click the Servers tab. The Syslog dialog
box with the Servers tab selected displays syslog information for a single switch.
Step 2
Configure the server attributes for the syslog.
Step 3
To add a syslog server, click Create. You see the Create Syslog Server dialog box.
Complete the fields on this dialog box and click OK.
Step 4
Configuring Syslog Attributes
To configure syslog attributes, follow these steps:
Step 1
From the Fabric Manager, choose Events > Syslog on the menu tree and click the General tab. The
Information pane displays syslog information for multiple switches.
From the Device Manager, choose Events > Syslog and click the General tab. The General tab of the
Syslog dialog box displays syslog information for a single switch.
Step 2
Configure the general attributes for the syslog.
Configuring Syslog Priorities
To configure syslog priorities, follow these steps:
Step 1
From the Fabric Manager, choose Events > Syslog on the menu tree, and then click the Priorities tab.
The Information pane displays syslog information for multiple switches.
From the Device Manager, choose Events > Syslog, and then click the Priorities tab. The Syslog dialog
box with the Servers tab selected displays syslog information for a single switch.
Configure the priorities for the syslog.
Step 2
Default Settings
Table 28-4
OL-7753-01
lists the default settings for system message logging.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Default Settings
28-6
Advertisement
Chapters
Table of Contents
Troubleshooting
