Configuring Fc Timers - Cisco DS-C9216I-K9 Configuration Manual

Advanced Features and Concepts
This chapter describes the advanced features provided in switches in the Cisco MDS 9000 Family. It
includes the following sections:
This chapter contains the following topics:
•
•
•
•
•
•
•
•
•

Configuring FC Timers

The fctimer command modifies Fibre Channel protocol related timer values for the switch.
You can use the fctimer command in configuration mode to configure the following TOVs:
•
•
•
The Fabric stability TOV (F_S_TOV) constant cannot be configured.
Note
OL-7753-01
Configuring FC Timers, page 31-1
Configuring a Fabric Analyzer, page 31-2
Configuring World Wide Names, page 31-5
Allocating Flat FC IDs, page 31-5
Enabling Loop Monitoring, page 31-6
Configuring the Switch for Interoperability, page 31-6
Using the show tech-support Command, page 31-8
Managing World Wide Names, page 31-9
Configuring Timers, page 31-9
Distributed services TOV (D_S_TOV)—The valid range is from 5,000 to 10,000 milliseconds. The
default is 5,000 milliseconds.
Error detect TOV (E_D_TOV)—The valid range is from 1,000 to 10,000 milliseconds. The default
is 2,000 milliseconds. This value is matched with the other end during port initialization.
Resource allocation TOV (R_A_TOV)—The valid range is from 5,000 to 10,000 milliseconds. The
default is 10,000 milliseconds. This value is matched with the other end during port initialization.
C H A P T E R
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
31
31-1