Using The Ip Filter Wizard; Creating Ip Profiles - Cisco DS-C9216I-K9 Configuration Manual

Chapter 24 Configuring IP Storage
Table 24-3
Advertising iSCSI target
iSCSI hosts mapping to virtual Fibre Channel
hosts
Dynamic iSCSI initiators
Identifying initiators
Advertising static virtual targets
iSCSI login authentication
Ethernet PortChannel IP address usage

Using the IP Filter Wizard

Use the IP Filter Wizard to manage IP filters.
From the Fabric Manager, click the IP Filter icon on the Fabric Manager toolbar.
Step 1
Figure 24-32
The IP Filter Wizard is displayed.
Step 2 Follow the prompts in the wizard to manage IP filters.

Creating IP Profiles

To create an IP profile, perform the following steps.
From the Fabric Manager, choose Security > IP Filter from the menu tree. You see IP filter information
Step 1
on the Fabric Manager Information pane.
Click the Profiles tab to see a list of profiles.
Step 2
Click the Create Row icon. You see the Create Profile dialog box.
Step 3
Choose the switches you want to include in the profile by checking the check box next to the switch's
Step 4
address.
OL-7753-01
Default iSCSI Parameters (continued)
IP Filter Wizard
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Advertised on all Gigabit Ethernet interfaces,
subinterfaces, PortChannel interfaces, and
PortChannel subinterfaces
Dynamic mapping.
Members of the VSAN 1.
iSCSI node names.
No initiators allowed to access a virtual target
(unless explicitly configured).
CHAP or none authentication mechanism.
Source and destination IP addresses.
Using the IP Filter Wizard
24-45