Default Settings
Default Settings
Table 15-1
Table 15-1
Parameters
Default zone policy
Full zone set distribute
Read-only zones
Migrating a Non-MDS Database
You use the Zone Migration Wizard to migrate a non-MDS database.
From the Fabric Manager, choose Zone > Migrate Non-MDS Database. You see the Zone Migration
Step 1
Wizard.
Follow the prompts in the wizard to migrate the database.
Step 2
Using the Zone Wizard
Use the Zone Wizard to configure zones, read-only zones, and IVR zones.
From the Fabric Manager, click the Zone Wizard icon in the Fabric Manager Zone toolbar (see
Step 1
Figure
Figure 15-7
You see the Zone Wizard.
Follow the prompts in the wizard to migrate the database.
Step 2
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
15-18
lists the default settings for zone parameters.
Default Zone Parameters
15-7).
Zone Wizard Icon
Chapter 15
Configuring and Managing Zones
Default
Denied to all members.
The full zone set(s) is not distributed.
Read-write attributes for all zones.
OL-7753-01