Configuring Multiple Vsans - Cisco DS-C9216I-K9 Configuration Manual

Chapter 22 Configuring IP Services
Figure 22-4

Configuring Multiple VSANs

More than one VSAN can be used to segment the management network in multiple subnets. An active
interface must be present on the switch for the VSAN interface to be enabled.
To configure an overlay VSAN, follow these steps:
Add the VSAN to the VSAN database on any switch in the fabric.
Step 1
Create a VSAN interface for the appropriate VSAN on any switch in the fabric.
Step 2
Assign an IP address on every VSAN interface on the same subnet as the corresponding VSAN.
Step 3
Step 4 Define the multiple static route on the Fibre Channel switches and the IP cloud.
OL-7753-01
Overlay VSAN Configuration Example
Int vsan10 - 10.10.10.88
VSAN HR
Int vsan10 - 10.10.10.124
IP default gateway
10.10.10.34
VSAN 10
Int vsan10 - 10.10.10.35
Int vsan10 - 10.10.10.34
VSAN ENG
172.23.84.74
mgmt 0
172.23.84.86
IP cloud
ip route 10.10.10.0 255.255.255.0 172.23.93.74
Physical Fibre
Channel Fabric
NMS
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Configuring Multiple VSANs
22-9