Cisco DS-C9216I-K9 Configuration Manual page 38

New and Changed Information
Table 1
Feature
Multiple pWWNs to
same alias
Quiesce
iSCSI SACK Default
Essential Upgrade
Prerequisites
iSCSI name restriction
Rolling upgrades
Running configuration
information
Licensing
Initial Setup Additions
Automatic image
synchronization
Standby state
OL-7753-01
Documented Features for the Cisco MDS 9000 Family Fabric Manager Switch
Configuration Guide (continued)
Description
You can add/associate multiple
pWWNs and fWWNs to the same
alias name.
You can now quiesce/disable a port
channel member. This will quiesce
a port channel member ISL, and
administratively bring down both
ports.
The TCP SACK parameter is
enabled by default for iSCSI
configurations.
Obtaining recommendations based
on your current operating
environment.
The iSCSI qualified name is
restricted to a maximum name
length of 223 alphanumeric
characters and a minimum length
of 16 characters.
The Cashing Services Module
(CSM) and the IP Storage (IPS)
services module use a rolling
upgrade install mechanism
Display Configurations based a
specified feature, interface,
module, or VSAN.
Access specified premium features
on the switch.
Configure the full zoneset
distribution and FC ID persistence
features for the entire fabric during
initial setup.
The running image is
automatically synchronized in the
standby supervisor module by the
active supervisor module.
The internal standby state indicates
that a switchover is possible when
the redundancy state or the
supervisor state display standby or
HA standby.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Where
Changed in Release Documented
1.3(4)
1.3(4)
1.3(3)
1.3(3)
1.3(3)
1.3(2a)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
xxxviii