Setting The Priority Based On Interface State; Configuring Vrrp Operations Attributes; Default Settings - Cisco DS-C9216I-K9 Configuration Manual

Default Settings

Setting the Priority Based on Interface State

The tracking feature is disabled by default. When you specify the tracking option, the priority of the
virtual router is changed based on the state of another interface in the switch. When the tracked interface
is down, the priority of the virtual router is changed to a lower priority value. When the tracked interface
is up, the priority of the virtual router is restored to its original value. You can track one of two interfaces
on a switch in the Cisco MDS 9000 Family: a specified VSAN interface or a management interface.

Configuring VRRP Operations Attributes

To configure VRRP operations attributes from Device Manager, follow these steps:
Choose IP > VRRP. You see the Operations tab of the VRRP dialog box.
Step 1
Configure operations attributes for the virtual router.
Step 2
To create a new VRRP entry, click Create. You see the Create VRRP Entry window.
Step 3
Complete the fields in this window to create a new VRRP entry, and click OK or Apply.
Step 4
Default Settings
Table 22-3
Table 22-3
Parameters
VSAN IP interface configuration
IP routing
Domain lookup
Domain name
Domain list
Name server
Virtual router
Virtual router priority for switches with secondary
IP address
Virtual router priority for switches with primary
IP address
Time interval between advertisement frames
Preempting master VR
VRRP security authentication
Interface state tracking
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
22-14
lists the default settings for IP features.
Default IPFC Settings
Chapter 22
Default
No IP address is assigned by default.
Disabled.
Disabled.
Enabled.
No domains are configured.
No servers are configured.
Disabled (shutdown).
100.
255.
1 second.
Enabled.
No authentication.
Disabled.
Configuring IP Services
OL-7753-01