Default Settings - Cisco DS-C9216I-K9 Configuration Manual

Chapter 21 Configuring Fibre Channel Routing Services and Protocols
Table 21-4
Maximum age (MaxAge)
Hello interval
Dead interval
Distribution tree information
Routing table
Load balancing
In-order delivery
Drop latency
Static route cost
Remote destination switch
OL-7753-01
Default FSPF Settings (continued)
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
60 minutes.
20 seconds.
80 seconds.
Derived from the principal switch (root node).
FSPF stores up to 16 equal cost paths to a given
destination.
Based on destination ID and source ID on
different, equal cost paths.
Disabled.
Disabled.
If the cost (metric) of the route is not specified, the
default is 10.
If the remote destination switch is not specified,
the default is direct.

Default Settings

21-11