Turning Auto-Learning On Or Off - Cisco DS-C9216I-K9 Configuration Manual

About Auto-Learn
Table 20-2
Scenario
11
12
13
14
15
16
17
18
19
20

Turning Auto-Learning On or Off

To turn Auto-learning on or off, perform the following steps.
Step 1 From the Fabric Manager, choose Port Security from one of the VSANs on the menu tree.
The Information pane of the Fabric Manager displays Port Security information for that VSAN.
Click the Action tab.
Step 2
You see a list of switches for that VSAN.
Click in the AutoLearn column next to the switch for which you want to enable AutoLearning.
Step 3
Choose on from the drop-down menu to turn on AutoLearning; choose off to turn off AutoLearning for
Step 4
that switch.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
20-6
Authorization Results for Scenario (continued)
Device
Connection
Request Authorization
P4, N4, F5 Permitted
(auto-learn on)
P4, N4, Denied
F5(auto-learn
off)
S3, F5 Permitted
(auto-learn on)
S3, F5 Denied
(auto-learn off)
P1, N1, F6 Denied
(auto-learn on)
P5, N5, F1 Denied
(auto-learn on)
S3, F4 Denied
(auto-learn on)
S1, F3 Permitted
(auto-learn on)
P5, N3, F3 Permitted
P7, N3, F9 Permitted
Chapter 20 Configuring Port Security
Condition Reason
3 No conflict
4 No match
3 No conflict
4 No match
2 P1 is bound to F1
7 P3 is bound to F1
7 P3 paired with F4
5 No conflict
6 Wildcard match
for F3 and N3
6 Wildcard match
for N3
OL-7753-01