Enabling A One-Time Authentication For Snmp Over Tcp; Assigning Snmp Device Contact And Location Information - Cisco Nexus 7000 Series Configuration Manual

Enabling a One-Time Authentication for SNMP over TCP

Enabling a One-Time Authentication for SNMP over TCP
You can enable a one-time authentication for SNMP over a TCP session.
Procedure
Step 1
Step 2
Step 3

Assigning SNMP Device Contact and Location Information

You can assign the device contact information, which is limited to 32 characters (without spaces) and the
device location.
Procedure
Step 1
Step 2
Step 3
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
204
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
snmp-server tcp-session [auth]
Example:
switch(config)# snmp-server tcp-session
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
snmp-server contact name
Example:
switch(config)# snmp-server contact Admin
snmp-server location name
Example:
switch(config)# snmp-server location
Lab-7
Configuring SNMP
Purpose
Enters global configuration mode.
Enables a one-time authentication for SNMP
over a TCP session. The default is disabled.
(Optional)
Copies the running configuration to the
startup configuration.
Purpose
Enters global configuration mode.
Configures sysContact, which is the SNMP
contact name.
Configures sysLocation, which is the SNMP
location.