Display General Ntp Statistics For A Switch; Create An Ntp Server Or Peer - Cisco DS-C9216I-K9 Configuration Manual

Chapter 6 Initial Configuration

Display General NTP Statistics for a Switch

To display general NTP statistics for a switch, perform the following steps.
From the Fabric Manager Physical pane of the menu tree, choose Switches > System, or from Device
Step 1
Manager, choose Admin > NTP.
In Fabric Manager, you see the System information pane. In Device Manager, you see the NTP dialog
box.
Click the NTP General tab.
Step 2
You see the general NTP statistics for that switch.

Create an NTP Server or Peer

To create an NTP server or peer, perform the following steps.
From the Fabric Manager Physical pane of the menu tree, choose Switches > System, or from Device
Step 1
Manager, choose Admin > NTP.
In Fabric Manager, you see the System information pane. In Device Manager, you see the NTP dialog
box.
Click the NTP Peer tab.
Step 2
You see a list of NTP peers and servers for that switch.
Click Create.
Step 3
You see the Create NTP Peer dialog box.
Enter the peer address in the Peer Address field.
Step 4
Step 5 Choose the mode (peer or server).
Check the PrefPeer check box if you want this peer to be a Preferred Peer.
Step 6
Click Create to create the peer or server, or click Close to close the dialog box without creating the peer
Step 7
or server.
The newly created peer or server is listed on the Peer tab.
OL-7753-01
Display General NTP Statistics for a Switch
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
6-3