Cisco DS-C9216I-K9 Configuration Manual page 39

New and Changed Information
Table 1
Feature
Terminal connection
options
Standby supervisor
module boot variables
Replacing modules
Transceiver and
calibration information
Buffer-to-Buffer Credit
(BB_credit) display
PortChannel Quiesce
Zone membership
Inter-VSAN routing
(IVR)
Fabric-Device
Management Interface
(FDMI)
AAA server groups
TACACS+
authentication
RADIUS enhancements Configure multiple RADIUS
OL-7753-01
Documented Features for the Cisco MDS 9000 Family Fabric Manager Switch
Configuration Guide (continued)
Description
From the active supervisor module,
you can connect to a console
terminal, a Telnet terminal, or an
SSH terminal.
The software forces the standby
supervisor module to run the same
version as the active supervisor
module.
Ensure that the new module is
running the same software version
as the rest of the switch. I.
Display real-time diagnostics
information.
Displays the receive and transmit
BB_credit along with other
pertinent interface information.
Use the quiesce feature on an ISL
to gracefully shutdown an interface
without dropping any frames.
Assign zone membership criteria is
also based on the interface and
domain ID, domain ID and port
number, and IP address.
Access resources across VSANs
without compromising other
VSAN benefits.
Enables management of devices
using the FDMI feature.
Configure remote AAA servers
using server groups.
Use the Terminal Access
Controller Access Control System
plus (TACACS+) protocol to
communicate with remote AAA
servers.
server groups.
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Where
Changed in Release Documented
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
1.3(1)
xxxix