Default Settings - Cisco DS-C9216I-K9 Configuration Manual

Chapter 13 Configuring Trunking
The trunking protocol cannot detect merging of VSANs when a third-party switch is placed in between
two Cisco MDS 9000 Family switches. (See
Figure 13-5
Switch 1
VSANs 2 and 3 get effectively merged with overlapping entries in the name server and the zone
applications. The Cisco MDS 9000 Fabric Manager helps detect such topologies. Refer to the Cisco MDS
9000 Family Fabric Manager User Guide for more information.

Default Settings

Table 13-2
Table 13-2
Parameters
Switch port trunk mode
Allowed VSAN list
Trunking protocol
OL-7753-01
Third-Party Switch VSAN Mismatch
Third-party switchs
VSAN 2
E port
Switch 2
lists the default settings for trunking parameters.
Default Trunk Configuration Parameters
Figure 13-5.)
VSAN 3
E port
Switch 3
Default
On
1 to 4093 user-defined VSAN IDs
Enabled
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
Default Settings
13-5