Cisco DS-C9216I-K9 Configuration Manual page 79

Chapter 3 Overview of Fabric Manager
Figure 3-3
Performance
GUI Collection
See Chapter 30, "Monitoring Network Traffic Using SPAN"
Note
for your span destination port. It is important that the data you collect through this port matches the data
collected by Performance Manager through the MGMT0 port. If the data does not match, you will not
be able to view the Cisco Traffic Analyzer information through a Traffic Analyzer link on the detail page
of a Performance Manager report.
For information on setting up the Cisco Traffic Analyzer, refer to the Cisco MDS 9000 Family Port
Analyzer Adapter 2 Installation and Configuration Note.
To configure Performance Manager to work with the Cisco Traffic Analyzer, perform these steps:
Set up the Cisco Traffic Analyzer according to the instructions in the Cisco MDS 9000 Family Port
Step 1
Analyzer Adapter 2 Installation and Configuration Note.
You will need three pieces of information:
Step 2
• The IP address of the management workstation on which you are running Performance Manager and
Cisco Traffic Analyzer
• The path to the directory where Cisco Traffic Analyzer is installed.
• The port that is used by Cisco Traffic Analyzer (the default is 3000).
Start the Cisco Traffic Analyzer.
Step 3
From the Fabric Manager Performance menu, choose Traffic Analyzer > Open.
1.
Enter the URL for the Cisco Traffic Analyzer, in the format
2.
http://<ip address>:<port number>
where:
<ip address> is the address of the management workstation on which you have installed the Cisco
Traffic Analyzer, and
:<port number> is the port that is used by Cisco Traffic Analyzer (the default is :3000).
OL-7753-01
Overview of Performance Manager/Cisco Traffic Analyzer Configuration
Management Workstation
Cisco Traffic
Manager Analyzer
GUI Collection
NIC 1
Configuring PM for Use with Cisco Traffic Analyzer
Span Destination Port
PAA2
NIC 2
Network
for information on configuring the settings
Cisco MDS 9000 Fabric Manager Switch Configuration Guide
MDS 9000 Switch
MGMT0
Port
3-17