Intel
®
Server System R1000WT Product Family System Integration and Service Guide
7.5 Replacing the Standard Front Control Panel
7.5.1
Standard Front Control Panel Removal
•
Power off the system and remove all power cords
•
Remove the system top cover (see section 2.2.1)
•
Remove the air duct (see section 2.3.1)
•
Remove the right system fan assembly (see section 6.1.1)
•
From the server board, disconnect the 30-pin front panel cable
•
Remove the screw securing the Control Panel assembly to the chassis (see letter "A")
•
Remove the control panel board from the chassis (see letter "B")
7.5.2
Standard Front Control Panel Installation
•
Locate and remove the replacement control panel board from its packaging - Intel Product Code - FXXFPANEL
•
Install the control panel board into the chassis (see letter "A")
Note: Ensure the plastic gasket over the control panel buttons is securely in place before installing the control panel
board into the drive bay module.
•
Connect the 30-pin cable to the new control panel
74
Figure 97. Standard Front Control Panel Removal
Figure 98. Standard Front Control Panel Installation
Rev 2.2