Novell NETWARE 6-DOCUMENTATION Manual page 1772

After the Remote Router's Configured Routes and Services screen
appears, you can remove items from the routing table by highlighting or
marking the entries and pressing Del .
10a
Press Ins to add static routes or services to the remote routing table.
A progress screen appears while the local system reads the currently
configured routes and services.
The Selectable Routes and Services screen appears. The routes and
services listed here are from the local router's table. They show only
the routes and services that are not already present on the remote
router's table.
10b
Mark the routes or services you want to add to the remote routing
table.
Use the following keys to mark your selections:
F5 —Marks the current entry.
Tab —Marks all entries that have the same network number as
the currently highlighted entry.
F6 —Lets you use wildcard characters (* and ?) to select entries.
If you use F6 , the Select Wild Card Marking Option screen
appears. You can select Match Service Names or Match
Network Numbers . After you make a selection, the Enter
Pattern for Matching screen appears, enabling you to enter the
name or number pattern and wildcard.
10c
Press Enter .
The Select Currently Marked Routes and/or Services? screen
appears.
10d
Select Yes .
11
Press Esc twice.
STATICON allows you to choose whether to save the static configuration
to disk now or test the configuration first by trying to establish a
connection.
If you want to save the configuration to disk now, continue with
12 on page 62.
If you want to test the configuration before saving it to disk, select Do
Not Save the Routing Tables to Permanent Storage.
Step
61
Setting Up