Novell NETWARE 6-DOCUMENTATION Manual page 1922

Device Type —Press Enter and select from a list of defined
AppleTalk NBP device types, or press Ins to add a new NBP type
with the following information:
Device Type —Enter a text string of up to 32 characters.
Comment —Enter an optional short description.
Device Location Type —Specify where the filtered device is located
from the following choices: <Any> (the default), Interface ,
Interface Group , Non-extended Network , Multiple/Extended
Network, Zone , or AURP Tunnel .
Select <Any> to select all device locations to show or hide all
devices to the user location.
Device Location —Specify the following parameters, based on what
you selected for Device Location Type :
<Any > or AURP Tunnel —This field cannot be edited.
Interface —Press Enter , then select a specific interface on which you
want to filter the service. You can select a LAN interface, a WAN
interface, the internal network, or all interfaces. The default is All
Interfaces .
Interface Group —Press Enter , then select a network interface group
from the list.
Non-extended Network —Press Enter , then type a network number
to identify the nonextended network in which the filtered device is
located.
Multiple/Extended Networks —Press Enter , then type the start and
end network numbers for the extended network in which the filtered
device is located. The start number must be greater than zero, and the
end number must be greater than or equal to the start value.
You can enter a specific extended network, or a range of extended
and nonextended networks. For example, for networks 1-9, 10, 11-
20, 21-30, specifying an extended range of 1-30 will filter all devices
in the 1-9, 10, 11-20, and 21-30 extended networks.
Zone —Press Enter , then type the name of the AppleTalk zone in
which the filtered device is located.
62
Filter Configuration